An electrofusion end cap is used to cap off the end of a HDPE pipe. With a size range from 20 mm to 315 mm, electrofusion end cap fittings come in SDR 11 (which also suits SDR 13.6 & SDR 17). Electrofusion end cap fittings are made from PE100 material with a precisely moulded energising coil of wire, ensuring uniform melting for a strong electrofusion joint and the minimisation of welding and cooling times. SDR 11, SDR 13.6 and SDR17 electrofusion end caps are rated to PN16 water and 1000 kPa gas. End cap electrofusion fittings are suitable for use for HDPE pipe, and welded with an electrofusion pressure welder. Electrofusion end cap PE fittings may also be known as an electrofusion end caps or EF pipe end caps. Electrofusion End Cap sizes available:
Electrofusion of HDPE uses electrofusion fittings which have small copper wires coiled around the inside. Electric current is then run through those wires using an electrofusion processor in turn melting the HDPE on the inside of the fitting and the outside of the pipe.
Saba Poolad Lidoma provide wide range of electrofusion fittings in different sized, including: coupler, reducer, equal tee, reducing tee, elbow 90,elbow 45 … Our HDPE electrofusion fittings are made from best quality PE100 raw material, and they are mainly used for HDPE gas & water pipeline system.
Our HDPE electrofusion fittings can fully comply with EN12201-3, EN1555 & EN ISO 15494 standard. By comparing other HDPE pipe fittings (socket fusion fittings, butt fusion fittings.,etc.), HDPE electrofusion fittings have following advantages:
- High safety and removal of obstacles and repairsEase and quickly operate in runtime and save time
- High resistance to earthquakes and environmental stresses
- Flexibility and lightness
- Immune to corrosion
- Pressure and impact resistance
- Ease of installation, which prevents possible errors from the executives
- Eliminating gas and water waste in gas supply and water supply networks
- Smooth welding surface
- Ease of cleaning
- Avoid penetration into the welding area
- Avoid obstacles and damage
PRODUCT DESCRIPTION
- 20 mm electrofusion end cap (2274.0020).
- 25 mm electrofusion end cap (2274.0025).
- 32 mm electrofusion end cap (2274.0032).
- 40 mm electrofusion end cap (2274.0040).
- 50 mm electrofusion end cap (2274.0050).
- 63 mm electrofusion end cap (2274.0063).
- 75 mm electrofusion end cap (2274.0075).
- 90 mm electrofusion end cap (2274.0090).
- 110 mm electrofusion end cap (2274.0110).
- 125 mm electrofusion end cap (2274.0125).
- 140 mm electrofusion end cap (2274.0140).
- 160 mm electrofusion end cap (2274.0160).
- 180 mm electrofusion end cap (2274.0180).
- 200 mm electrofusion end cap (2274.0200).
- 225 mm electrofusion end cap (2274.0225).
- 250 mm electrofusion end cap (2274.0250).
- 280 mm electrofusion end cap (2274.0280).
- 315 mm electrofusion end cap (2274.0315).
